M600

• 01. Does Gremsy T3V3 support M600 or A3 + Lightbridge 2 control?
  The T3V3 supports control through M600 or any drone frame using A3 FC and Lightbridge 2.
• 02. Which kind of operator it supports?
  The T3V3 supports both single and dual operators (slave and master).
• 03. How to configure Gremsy gimbal to use with DJI Lightbridge 2 or M600’s remote?
  Step 1: Install the latest Software/Firmware
  
  The firmware and software were updated at Download.
  
  Step 2: Connect Gremsy gimbal to GPS of Flight controller A3/N3
  
  Step 3: Select Single or Dual Mode
  
  At Single Mode, in software: Go to Setting -> Controls -> LightBridge 2 -> Single
  
  - Move the GIMBAL DIAL on the remote to turn on the motors.
  
  - Toggle C1 to control tilt or pan (make sure Tilt in TILT LOCK , go to SETTINGS -> FOLLOW-TILT->TILT LOCK).
  
  - Pan will be in follow mode if not use GIMBAL DIAL for PAN control.
  
  At Dual Mode, in software: Go to Setting -> Controls -> LightBridge 2 -> Dual
  
  - Move the GIMBAL DIAL on the remote to turn on the motors.
  
  - Use Tilt/roll/pan stick to control tilt/roll/pan.