Download

UPGRADE FIRMWARE INSTRUCTION

STEP 1: INSTALL USB DRIVER

Make sure you installed the Driver for USB before continuing next steps.

STEP 2: UPGRADE FIRMWARE

1/ Before upgrade:

– Download the latest Software version for MAC or Windows if not install yet.
– Install USB Driver if not installed yet.
– Download the Firmware in Zip format.
– Unzip to get the *.hex file.
– Unplug Remote Receiver (SBUS, JR, …) if it was plugged to gStabi system.
– Connect Gimbal to you Mac or PC by USB cable.

2/ During upgrade:

– Power on Gimbal.
– Run the software and select Upgrade.
– Follow Steps on the screen.

3/ Troubleshooting

If you have failed during the firmware upgrade, please follow this article to configure again
You can also contact our support via [email protected] for prompt support

 

FIRMWARE
Gremsy SYNC firmware v2.2.0

06 - 03 - 2017

What's new?

Download
Gremsy SYNC for Ronin firmware v3.0.2

11 - 07 - 2018

What's new?

Download
SOFTWARES
Windows: gTune Desktop v1.4.1

08 - 04 - 2020

Download
Mac OSX: gTune Desktop v1.4.1

08 - 04 - 2020

Download
APP
Android : gTune - Version 2.2.8

14 - 06 - 2018

Requires Android 4.1.2 or later.Compatible with Samsung tabs 705c, Samsung S6,
Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II,
Ascend Mate7, Huawei P8 Max, Huawei Mate 8, Nubia Z7 mini, Sony Xperia
Z3, MI 3, MI PAD, Smartisan T1.

*Support for additional Android devices available as testing and development 
continuesDownload
(iOS - iPhone/iPad) gTune - Version 2.2.8

14 - 06 - 2018

Requires iOS 8.0 or later. Compatible with iPhone 5s, iPhone 6, iPhone 6 Plus,
iPhone 6s, iPhone 6s Plus,iPod touch 6,iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular,
iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular.
This app is optimized for iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s and
iPhone 6s Plus.

Download