Camera

• 01. Is it difficult to balance the gimbal and camera?

  No. Changing the setup for different camera arrangements is quick and simple.
  Learn more our balance tutorial at: 

• 02. What kind of cameras does Gremsy T3 support?

  It currently supports cameras with a maximum depth of 100 mm (measured from the center of gravity), a maximum height of 120 mm, and a maximum width of 152 mm. The maximum payload of T3 is 1.7 kgs (3.75 lbs).

  Gremsy T3 Camera Compatibility List (non-comprehensive list):

  • BlackMagic Pocket, BlackMagic Micro Cinema Camera
  • Canon 5D Mk I, II, III, IV
  • Nikon D810, D800
  • Sony A7S (mk I - II), A7R (mk I - II - III)
  • Sony A6000, A6300, A6500
  • Sony 5100
  • Sony RX100 (I - V)
  • Panasonic GH3, GH4, GH5, GH5s
  • Pentax
    ....
• 03. Does Gremsy T3 support HDMI signal?
  No, it does not. 
• 04. Does Gremsy T3 support trigger signal?

  Exactly, Gremsy T3 supports AUX ports to connect camera to trigger of third party in clean setup. 
  Learn more our setup with Seagull UAV at the following video: 

• 05. Which trigger devices do you recommend?
  We use Seagull UAV trigger for Sony camera. Some clients used Intelli G sucessfully. 
• 06. How to install Gremsy T3 with BMMCC?

  Please refer the following video: Gremsy T3 - Installing BMMCC

  Very important:
  

  • Blackmagic micro cinema supports to control zoom, shutter, rec... via SBUS signal only. 
    

  Gear in setup made by Gremsy: 
  

  • T1/T3 - Control cable for BMMCC
    

  You also need: 
  

  • Video transmitter 
  • Y-SBUS Cable
• 07. Is it possible to mount Gremsy T1 with HX90/HX60?
  Gremsy T3 fits HX90 and HX60 camera size. However, these camera were designed HDMI port located at bottom position and near srew connection, it would be harder to connect HDMI from camera while mounting inside gimbal. 
  You should modify camera plate for this purpose.