Gremsy T3 PE
Gremsy Two-axis T3v3
Duo Zion Arm
HT Vibration Isolator
HEX Vibration Isolator
QUAD Vibration Isolator
No products in the cart.
The new S1 features HDMI Quick Release as well as new I/O design and the ability to start up in 2 seconds. Moreover solid and clean design allow durability and ease of setup with plenty of cameras up to 1.6lbs
Static Current 300mA @14.5V
Dynamic Current 600mA @14.5V
Locked Motor Current Max 4A @14.5V
POWER: to get power directly from external batteries of the drone or other power supply. Voltage input ranges from 15V to 52V and is down-converted to a stable 14.5V by the internal circuit to provide power to gimbal and accessories.
Connector type: Molex Microfit 3.0 2 pin
CAN: to interface with CAN bus on DJI Flight controller or another module that uses CAN bus.
Connector type: JST SM04B-GHS-TB
COM2/COM4: to interface with Pixhawk or Pixhawk 2 via Mavlink protocol or other modules that use serial protocol (UART).
Connector type: JST SM06B-GHS-TB
SBUS/PPM:To interface with SBUS/PPM receiver.
AUX:: There are S1, S2, S3,...,S8,S9 optional signals (0.25A max) for users to connect to other devices such as AV signal or camera trigger...This port is internally connected to AUX port on the camera tray.
Connector type: JST SM10B-GHS-TB
USB: to interface with computer or upgrading firmware.
Connector type: Micro USB TYPE B
JR: to interface with JR/SPEKTRUM satellite receiver.
Connector type: JST S3B-ZR
HDMI: HDMI video output from the camera.
Connector type: Micro HDMI
AUX: There are S1, S2, S3,...,S8,S9 optional signal (0.25A max) for users to connect to other devices such as AV signal or camera trigger...This port is internally connected to AUX port on the Hyper Quick Release.
PWT: 14.5V 2A output for camera and accessories.
Connector type: JST S2B-XH-A(LF)
HDMI: HDMI video input from the camera.
A. Micro USB Cable (x1)
B. Power Supply Cable (x1)
C. Canlink Cable For Pixhawk (COM2/COM4) (x1)
D. Sbus Cable (x1)
E. Auxiliary Cable (x2)
F. PWT Cable (x1)
G. Allen Key Set (x1)
Using 32mm square M3 pattern to mount the top part onto the frame or damping isolator.
STEP 1: The marks on the top part and bottom part must be aligned. The button on the ring should be aligned with the unlocked icon as shown in the first picture.
STEP 2: Keep everything aligned and attach the bottom part to the top part.
STEP 3: Rotate the ring clockwise until hearing a snap, the button should be automatically popped out and aligned with a locked icon.
STEP 1: Press and hold the button.
STEP 2: Rotate the ring counterclockwise.
STEP 3: When the button aligns the unlock icon, the S1 can be detached from the top part of Hyper Quick Release.
After connecting to the power supply, the gimbal will perform a series of alignments, self tests, which last about 2 seconds and will determine the status of the gimbal, indicated by the Status LED color. During this time, don’t touch the gimbal or camera.
Always start the gimbal with a balanced camera set up otherwise after initialization the controller will return an error followed by a red color indicator.
Make sure the Hyper Quick Release is mounted to the drone and its power port is already connected to the power supply correctly. Next, let’s mount the gimbal to the Hyper Quick Release, it will be automatically powered up.
LOCK MODE: is a stabilization mode where the camera maintains orientation independently of the rest of the gimbal and the orientation can be changed by an external control signal from remote control.
FOLLOW MODE: in this mode, the camera will mimic the operator’s movement and allows one person to control camera tilt and pan without using an external device like a remote control.
SINGLE OPERATOR: using FOLLOW mode.
DUAL OPERATOR: a second operator can use a Remote Controller (SBUS, SPEKTRUM, PPM) to control gimbal’s movement.
GREMSY S1 has 2 working operations: Normal and Inverted.
Using function button
Using mode channel on remote control
Mobile apps are available in App Store and Google Play
App name: gTune
Searching: “gremsy gtune”
-> Support -> Product Support -> GREMSY S1
Subscribe for all Latest