Store
(0)
0
Total: $0

No products in the cart.

Checkout
DIMENSIONS & CAMERA CAGE
 
 
CAMERA COMPATIBILITY
 

Wiris

Canon 6D Mk I, Mk II

Pentax

Nikon D810, D800, D500

Panasonic GH3, GH4, GH5

Sony A6000, A6300, A6500

Sony A7S (mk I - II)

Sony A7r (mk I - IV)

Sony A9 (mkI - II)

Phase One IXM50/100

UMC-S3CA

FUJIFILM X-T

 
GENERAL
 
Built-In Functions
  • 1. Operation Modes
    • Motor ON/OFF
    • Lock mode
    • Follow mode / Mapping mode
    • Inverted mode
  • 2. Temperature Sensor
  • 3. Gremsy Specialized Gimbal Drive Motors with Encoders
  • 4. Micro USB Connection
  • 5. Gremsy Advanced 32-Bit high performance ARM microprocessor
  • 6. S-Bus/Spektrum/PPM Receiver Supported
 
MECHANICAL & ELECTRICAL CHARACTERISTICS
 
Working Current
  • Static current: 300mA/14.5V
  • Dynamic current: 600mA/14.5V
  • Locked motor current: 3.5A/14.5V
 
Operating Temperature
  • 32° F ~ 122° F (0° C ~ 50° C)
 
Weight
  • 2.65 lb (1200 g)
 
Gimbal Dimension
  • 237(W) x 184(D) x 288(H)
 
PERIPHERAL
 
Camera Tray Dimensions
  • Maximum depth from the center of gravity on camera base plate: 100mm
  • Maximum height measured from top of camera base plate: 120mm
  • Maximum width: 152mm
 
Input Power
  • 15-52V
 
Connections
  • USB 2.0, CAN, UART, S-bus, Spektrum, PPM, Bluetooth 4.0
 
PC Assistant Software Requirements
  • Windows 10 or above; Mac OS X 12.0 or above
 
 
Mobile Assistant Software Requirements
  • iOS 14.0 or above; Android 10.0 or above
 
WORKING PERFORMANCE
 
Maximum Payload
  • 3.7 lbs (1700 g)
 
Angular Vibration Range
  • ± 0.02°
 
Maximum Controlled Rotation Speed
  • Pan axis: 180°/s
  • Tilt axis: 180°/s
  • Roll axis: 180°/s
 
Mechanical Endpoint Range
  • Pan axis control: ±345°
  • Tilt axis control: ±150°
  • Roll axis control: +80° to -264°
 
Controlled Rotation Range
  • Pan axis control: ±345°
  • Tilt axis control: ±120°
  • Roll axis control: ± 45°